info@wearintell.com

+86 13510755085

検索
この検索ボックスを閉じる

フィードバック

Your voice matters to us.

Thank you for visiting our website. Your feedback will help us to continuously improve and optimize our services to provide you with a better experience.
The personal information you provide and the content of your feedback will be kept strictly confidential. We will only use this information to improve our products, services and website experience and will not disclose it to third parties. We follow strict data protection legislation and take reasonable security measures to ensure the safety of your information. Your trust is important to us and we are committed to protecting your privacy rights.

Faq

Android phone settings:

1, Make sure the message push switch is turned on on the mobile client;

2, the notification bar of the cell phone can display the confirmation message normally. The message push of the bracelet is pushed by reading the message from the notification bar of the cell phone; if there is no message in the notification bar of the cell phone, the bracelet will not be able to receive the push. (You need to find the notification settings in the phone settings and open the notification switch of WeChat, QQ, phone, SMS and mobile client)

3、Open the auxiliary function settings of the bracelet client (see the auxiliary function in the phone settings, open the auxiliary function settings of the bracelet client)

Apple phone settings:

1、Confirm that the message push switch is opened on the cell phone client;

2, the notification bar of the phone can display the confirmation message normally (you need to find the notification settings in the phone settings and open the notification switch of WeChat, QQ, phone, SMS, and cell phone client).

The temperature of the bath water is relatively high, which produces a lot of water vapor, which is in the gas phase. Its molecular radius is small and it can easily seep through the cracks of the smart bracelet’s case and recondense when the temperature drops. The droplets in the liquid phase can easily cause a short circuit inside the smart bracelet, damaging the circuit board and damaging the smart bracelet.

The deviation of the measurement value of the smart bracelet and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is in the radial artery, while the measurement site of the smart bracelet is in the two main branches of the micro-arteries, and the measurement of the aortic blood pressure in the normal situation. and microvascular blood pressure measurement will differ by 30-40; if you measure with smart bracelet and sphygmomanometer at the same time, due to the blood flowing in the arteries is the centrifugal direction of the blood, sphygmomanometer measurement with the band makes the middle part of your elbow under pressure, temporarily the blood can not flow smoothly to the lower arterial branches; the vascular tension is increased, the difference between the upper and lower blood pressure measurements is larger.

You need to disconnect from your cell phone, please follow the steps below.

1、Android phone: unbind it in the settings of APP;

2、Apple phone: Unbind it in the APP settings, disconnect it, and then enter the Bluetooth settings interface in the phone settings, click the exclamation mark “Ignore this device” behind the Bluetooth name to complete the unbinding.

Please turn on the GPS track in an open place! After the APP starts the GPS track, the GPS signal strength level will be displayed in the track interface, if the GPS signal is weak, it is impossible to locate your position. There is no motion track display, usually in tunnels, under bridges, offices, office buildings and other places.

ヘッダービルダー」→「モバイル」→「モバイルメニュー要素」→「表示/非表示」→「メニューの選択」でカテゴリーメニューを設定します。
ショッピングカート
当社では、お客様の当社ウェブサイトでの体験を向上させるためにクッキーを使用しています。このウェブサイトを閲覧することにより、クッキーの使用に同意したものとみなされます。
探している投稿を見るために入力を始める。
jaJapanese

Get a quote

Let’s Have A Chat